On Thu, Oct 4, 2012 at 11:25 AM, prd::S <[email protected]> wrote: > Hi, All. > > A power outage occured when I was flashing the u-boot image on an > SRX210 via tftp. > Then there's no output on the serial console even after several resets. > I suspect that the primary u-boot image might be corrupted. > > The questions are: > Does SRX210 has a backup u-boot image? > If so, how to boot from that image? >
SRX-210 devices should be configured for dual boot partition by default. When you login after the primary is corrupted the login banner should warn you that the device booted from the alternate image, something like: WARNING: THIS DEVICE HAS BOOTED FROM THE BACKUP JUNOS IMAGE and "show system alarms" should provide an alarm indicating the same thing. I cannot remember how to tell if you have a dual boot partition, I suspect you can look in /dev for two partitions. You can backup the running image to the failed primary with system snapshot: device> request system snapshot slice alternate Formatting alternate root (/dev/da0s1a)... Copying '/dev/da0s2a' to '/dev/da0s1a' .. (this may take a few minutes) The following filesystems were archived: / If you are missing autorecovery information, there will be an alarm saying so, do this: request system autorecovery state save request system configuration rescue save And then "request system reboot" to boot from the restored primary. All this should be good google foo to look for a more detailed explanation. HTH, Elle Plato _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
