Hi Lukasz, It looks like you only have a port queuing DPC (-R) not a H-QoS DPC (-R-Q or -R-EQ). Without the -Q/-EQ DPCs I do not believe you can configure the per-unit COS functions.
Cheers, Caillin -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Lukasz Trabinski Sent: Tuesday, 9 October 2012 9:44 PM To: [email protected] Subject: [j-nsp] pic has no CoS queuing Hi I trying to configure shaping-rate on logical 10Gbit/s interface: xxx@xxx# show class-of-service interfaces xe-3/0/0 unit 591 shaping-rate 1k; xxx@xxx# show interfaces xe-3/0/0 per-unit-scheduler per-unit-scheduler; What I'm doing wrong? xxx@xxx# commit check [edit class-of-service interfaces xe-3/0/0 unit 591] 'shaping-rate' cannot configure bandwidth (pic has no CoS queuing) error: configuration check-out failed Hardware is: FPC 3 REV 17 750-021566 YP4998 DPCE 4x 10GE R CPU REV 04 710-022351 YN3030 DPC PMB PIC 0 BUILTIN BUILTIN 1x 10GE(LAN/WAN) _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp -- Message protected by MailGuard: e-mail anti-virus, anti-spam and content filtering.http://www.mailguard.com.au/mg _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
