On Wed, Oct 10, 2012 at 5:18 AM, Huan Pham <[email protected]> wrote: > http://www.juniper.net/techpubs/en_US/junos10.0/information-products/topic-collections/config-guide-cos/cos-assigning-fc-dscp-to-re-pkts.html > > Once I apply the Firewall Filter with QoS term on loopback interface, it > does not seem to change the default behaviour. > > I tried host-outbound-traffic feature, which assign a forwarding class, > and I can set DSCP for all traffic generated by RE, which works as it says, > but I want a finer control.
Which revision are you running? I believe this requires one of the 11.x releases on the MX(5|10|40|80). > *This behaviour is not what I expected. Does anyone experience the same > issue, please?* I was able to get it working for everything except PPM generated traffic (BFD, etc) which always went into the same queue. I've changed jobs since then so I don't have ready access to the configs I used, but I believe the MX was one of the platforms where I ran into trouble if I tried to use anything other than queue #3 for nc traffic. Have you tried capturing the traffic from a different box? It's possible that the RE sees the traffic before the rewrite occurs. :w _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
