Have you got SNMP enabled in the apprioriate security zone? For example: 'set security zones security-zone trust host-inbound-traffic system-services snmp'
Luca -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Saba Sumsam Sent: Thursday, 11 October 2012 2:31 PM To: [email protected] Subject: [j-nsp] SNMP Problem in SRX240H Hi, I have an SRX240H configured with a 'Juniper' community string. The 'show snmp statistics' shows 0 packets input and output. I can ping the SNMP server and can ping from the SNMP server to the SRX. I have also tried removing the Juniper community, and the logs show a 'SNMPD_AUTH_FAILURE: nsa_log_community: unauthorized SNMP community' error message. However, when I re-configure the community, I still get 0 packets in and out. The SRX is configured for packet mode. The SNMP server is running PRTG Any suggestions would be greatly appreciated! Regards, Saba. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
