Hi, I am testing Layer 2 circuit between Juniper MX-80 with Cisco platform. When the VLAN ID of both attachment circuit is matching, then traffic is flowing through emulated Layer 2 circuit. But when the VLAN ID is not matchingon both attachment circuit, then Layer 2 circuit remains up but the traffic is not flowing through Layer 2 circuit. The only work around is to renumber the VLAN ID on both sides to be same.
I tried doing things mentioned in " http://forums.juniper.net/t5/Routing/L2circuit-is-down-due-to-Vlan-id-mismatch-between-MX-80-routers/td-p/130173"; but it seems to be working only when both the routers are Juniper MX. Any option or workaround for this. Thanks in advance. Arun _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
