Hi
I’ve an MX5 peering PIM with a Cisco
6500, Cisco 6500 is also acting as RP with bootstrap-rp.
Unfortunately my MX5 is not dynamically
learning the rp ip address , do I’ve to specify something to do that in MX5 ?
I wondering since with PIM peering I
expect it working without any specific command…
If I specify static rp everything is
ok….
Any idea ?
Tks
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
