You can use the following too: set virtual-chassis preprovisioned set virtual-chassis no-split-detection set virtual-chassis member 0 role routing-engine set virtual-chassis member 0 serial-number [SERIAL-1] set virtual-chassis member 1 role routing-engine set virtual-chassis member 1 serial-number [SERIAL-2]
set chassis redundancy graceful-switchover set ethernet-switching-options nonstop-bridging set routing-options nonstop-routing set system commit synchronize On Tue, Nov 13, 2012 at 1:26 PM, Rachid DHOU <[email protected]> wrote: > Hi Experts, > > If i have a single EX4200 switch and i want to add a new EX4200 switch to > it using Virtual chassis capability. > > i want to let the old switch as a master and the new one as backup. > i will keep new switch OFF. > > on the old switch : > > set member 0 mastership-priority 255 > set member 1 mastership-priority 255 > > reload new switch. > > shall i need to reboot also the old switch ? > did i forget something to create the Virtual Chassis ? > > > *Kind regards,* > *Rachid DHOU* > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
