Luca,
My question is - on PE2 is it normal for it to show the VPLS connections
in a 'LN' (local site not designated) state, as shown below:
PE2>show vpls connections
Layer-2 VPN connections:
<snip>
Legend for interface status
Up -- operational
Dn -- down
Instance: VPLS-DirectNetworks
Local site: IC2-VPLS (2)
connection-site Type St Time last up # Up trans
1 rmt LN
2 rmt LN
This page on the juniper site seems to show a similar output but I just wanted
to confirm
http://www.juniper.net/techpubs/en_US/junos12.2/topics/example/vpls-multihomed-example.html
Yes, this is typical.
And so on PE1, your primary site probably shows status "RN" for site 2
(remote site not designated).
Clarke Morledge
College of William and Mary
Information Technology - Network Engineering
Jones Hall (Room 18)
Williamsburg VA 23187
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
