Uriel, I have also come across this last week but have not addressed it yet. Came across these suggestions on the Juniper forums which I will try later as the switches are offsite.
http://forums.juniper.net/t5/Ethernet-Switching/Inpur-errors-on-vme-interface/td-p/127021 Darius On Thu, Nov 15, 2012 at 11:16 AM, Uriel Segal <[email protected]> wrote: > Hey, > > In the EX4200 Virtual-chassis, both me0 interfaces are up and running > without any 'Input errors' on them. > Though, the common vme interface is counting 'Input errors' all the time. > > Both me0 are connected to a single OOB OAM switch, which is also a > virtual-chassis of 5xEX4200, each interface on a different member > > Both cables were check/replaced-anyway but it didn't help > > > Any idea why vme is counting those errors? > > > 10x, > Uriel > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- -- Regards, Darius Jan Seroka +31631902531 [email protected] _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
