As mentioned in the thread on OSPF packet drops, I have an MX80 dropping OSPF packets during every commit, after adding ~1500 VLAN interfaces.
The major load seems to be ppmd, not rpd. On larger MX's, it is apparently possible to distribute ppmd processing to the line cards. Does that work on the MX80? Alternative, is BFD cheap on an MX80? If I turn on BFD, I could set the OSPF hello timers longer than the current 10 seconds. Of course that is no good if BFD just makes even more work for the already-busy routing engine. /Benny _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
