Thanks a lot for your answer. As we can see ... version 12.2 is supporting policing (inside firewall filters) per logical unit.
QoS Firewall filters (access control list -ACLs) - family inet<http://www.juniper.net/techpubs/en_US/junos/topics/reference/general/firewall-filter-match-conditions-for-ipv4-traffic-acx-series.html> 12.2 Standard Firewall Filter Match Conditions for MPLS Traffic on ACX Series Routers<http://www.juniper.net/techpubs/en_US/junos/topics/reference/general/firewall-filter-match-conditions-for-mpls-traffic-acx-series.html> 12.2 Firewall filters - family ccc/any 12.2 Policing - per logical interface 12.2 Policing - per physical interface 12.2 Policing - per family 12.2 WZTECH is registered trademark of WZTECH NETWORKS. Copyright © 2012 WZTECH NETWORKS. All Rights Reserved. The information transmitted in this email message and any attachments are solely for the intended recipient and may contain confidential or privileged information. If you are not the intended recipient, any review, transmission, dissemination or other use of this information is prohibited. If you have received this communication in error, please notify the sender immediately and delete the material from any computer, including any copies. On Thu, Nov 29, 2012 at 3:52 PM, Pavel Lunin <[email protected]> wrote: > Hi Giuliano, > > > Does anyone has some experience using ACX1100 or any other router from > ACX > > family ? > > > > We are looking for an aggregate router for our network and we are > thinking > > to use ACX only with gig ports. > > > > There is some specific questions about this router: > > As what I know, many things are just not ready yet. While the box is > supposed to be a low-scale MPLS router with many of the PE features > needed for real-world including VPLS, L3VPN, policers and stuff, the > current software supports only Martini circuits and a few other things > (checkable with the docs: > > http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/reference/general/acx-series-features.html > ). > This is the reason why they are targeting ACX to mobile access market > where PWE3 is more or less enough (base stations aggregation through > MPLS, SyncE, ect). > > In a year or so it should look like a real router but now it's just a > very specialized thing. > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
