but that will kinda bypass it. Should i worry about it or just ignore it? Regards, *Ali Sumsam CCIE* *Network Engineer - Level 3* eintellego Pty Ltd [email protected] ; www.eintellego.net
Phone: 1300 753 383 ; Fax: (+612) 8572 9954 Cell +61 (0)410 603 531 facebook.com/eintellego PO Box 7726, Baulkham Hills, NSW 1755 Australia The Experts Who The Experts Call Juniper - Cisco – Brocade - IBM On Fri, Nov 30, 2012 at 12:30 PM, OBrien, Will <[email protected]> wrote: > no-validate > > That is, request system software install no-validate blah > > > On Nov 29, 2012, at 7:25 PM, Ali Sumsam wrote: > > > Hi, > > I have a brand new MX5 router for one of my customers. The only > > configuration I have on this router is > > > > 1, one login name and password > > 2, IP address on FXP0 > > 3, telnet and ftp service. > > > > I have uploaded Junos jinstall-ppc-11.2R5.4-export-signed.tgz, which is > the > > recommended one for MX5 on juniper site. > > > > > > When i try to validate this JunOS, it gives me following error. > > > > mgd: error: configuration check-out failed > > Validation failed > > WARNING: Current configuration not compatible with > > /var/tmp/jinstall-ppc-11.2R5.4-export-signed.tgz > > > > Any suggestion. Can I just ignore this error and live with it? > > > > Regards, > > > > > > *Ali Sumsam CCIE* > > *Network Engineer - Level 3* > > eintellego Pty Ltd > > [email protected] ; www.eintellego.net > > > > Phone: 1300 753 383 ; Fax: (+612) 8572 9954 > > > > Cell +61 (0)410 603 531 > > > > facebook.com/eintellego > > PO Box 7726, Baulkham Hills, NSW 1755 Australia > > > > The Experts Who The Experts Call > > Juniper - Cisco – Brocade - IBM > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
