With m7 the only useful action solving the issue was reboot... sent with Android
Giuliano Medalha <[email protected]> ha scritto: >People, > >We are doing some BGP tests using routing-instances on MX5-T-DC routers. > >We have created a routing-instance to receive 3 full routing inet.0 tables. > >The master routing has 3 majors full routing tables too. > >Before the tests we check the RE percentage of using memory ... using: > >Router> show chassis routing engine > >It show 47% usage. > >After the creation of the routing-instance (type virtual-router) - named >TEST we could receive more 3 full routing tables on the TEST.inet.0 table > >Using the same command is show to us: > >Router> show chassis routing engine > >87% memory utilization > >After we remove the routing-instance configuration with a commit command in >sequence ... it still shows the same 87% of memory utilization > >It this procedure is correct ? Is it any update command to clear the >memory allocation without disrupting forwarding services ? > >Can you please give me some feedback about it ? > >Did anyone see it before ? > >Thanks a lot, > >Giuliano >_______________________________________________ >juniper-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
