Hi all, I would like to do a simple test to make sure that SLAAC configuration on R1 is working as expected. However, I do not want to use a real PC connected to it to test, but I want to use another router (R2) as client. Could you please let me know if it is possible, and how it is done in Junos. Thanks.
Below is what I try to achieve if it is done in Cisco world. R2(config-if)#interface gig/0 R2(config-if)#ipv6 address autoconfig R2(config-if)# Thanks in advance. Cheers, _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
