shutdown the fxp0 interface and activate it again. Regards, Muhammad Aamir
On Tue, Jan 15, 2013 at 8:53 AM, Tima Maryin <[email protected]> wrote: > Hi, > > > > On 15.01.2013 9:29, Muruganandham M wrote: > >> Hi, >> >> I have set the configuration to ignore the fxp0 failure alarm. The >> alarm is ignored. However, the Log messages are filled with this alarm >> clear message every 5 second. >> > > > https://prsearch.juniper.net/**InfoCenter/index?page=** > prcontent&id=PR749954<https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR749954> > > ______________________________**_________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/**mailman/listinfo/juniper-nsp<https://puck.nether.net/mailman/listinfo/juniper-nsp> > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
