Thanks very much Jared. That saves me time scratching my head for a solution which does not exist.
On Thu, Jan 17, 2013 at 3:12 AM, Jared Gull <[email protected]> wrote: > Hi Huan, > > This is not currently possible on a Junos OS router. You must assign the > address or at least the prefix portion of the address and then use EUI-64 > to auto-generate the interface ID portion, which is based on the > interface's hardware address. Hope this helps. > > Jared > > > ------------------------------ > *From:* Huan Pham <[email protected]> > *To:* [email protected] > *Sent:* Wednesday, January 16, 2013 3:32 AM > *Subject:* [j-nsp] Cannot auto-configure the router interface IPv6 > address? > > Hi list, > > Could someone please confirm if we can or can not configure the router > interface to get an IPv6 address automatically. I read more than one place > that says this is not possible, but I could not find an official link from > Juniper website to confirm it. It is disappointing, if this is the case. > > Regards, > > Huan > > > On Mon, Jan 14, 2013 at 11:00 PM, Huan Pham <[email protected]> > wrote: > > > Hi all, > > > > I would like to do a simple test to make sure that SLAAC configuration on > > R1 is working as expected. However, I do not want to use a real PC > > connected to it to test, but I want to use another router (R2) as client. > > Could you please let me know if it is possible, and how it is done in > > Junos. Thanks. > > > > Below is what I try to achieve if it is done in Cisco world. > > > > R2(config-if)#interface gig/0 > > R2(config-if)#ipv6 address autoconfig > > R2(config-if)# > > > > Thanks in advance. > > > > Cheers, > > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
