Can you explain this a bit more? Sorry, this has me really curious and I
obviously need to get more up to speed on multicast because we are moving
towards IPTV shortly ;)
Here's the routing instance that is now working:
VLAN69-xxxxxxx-Headend {
instance-type vpls;
vlan-id 69;
interface ge-1/0/5.69;
route-distinguisher xx.xx.100.84:69;
vrf-target target:xxxx:9069;
protocols {
vpls {
site-range 3;
no-tunnel-services;
site xxxxxxxx-DAC {
site-identifier 1;
}
}
}
}
We didn't configure anything specific to multicast.
Thanks,
Paul
-----Original Message-----
From: Tima Maryin [mailto:[email protected]]
Sent: January-29-13 2:54 PM
To: Paul Stewart
Cc: [email protected]
Subject: Re: [j-nsp] Multicast Traffic over L2VPN
On 29.01.2013 22:09, Paul Stewart wrote:
>
> We converted the path from a routing-instance type of L2VPN to that of
> VPLS and now things are working fine.
Where you can also configure p2mp LSP for multicast traffic.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
