OK - so there has been a lot of discussion around this that I've seen, but I've searched for hours and still can't find concrete answers. Can someone help?
1. Does the 3.2 Gbps throughput limitation include overhead? In other words, Is the "raw" throughput 4 Gbps with effective throughput of 3.2 Gbps? Or is it 3.2 Gbps of raw throughput with effective throughput of 2.5 Gbps? 2. Is this throughput per PIC on the FPC? So let's say I have three 4x GigE IQ2 PICs and one channelized DS3 IQ PIC. Does each PIC get bandwidth allocated equally between them? So is it 800 Mbps per PIC, and the PICs can't "steal" bandwidth from another one? 3. Where, and based on what, is traffic dropped with Juniper head of line blocking (ie where multiple high speed input interfaces try to go out the same lower speed exit interface)? Thanks very much! _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
