Filippo, Can you send the output of "show lacp interface ae0"?
Thanks - Brian > -----Original Message----- > From: [email protected] [mailto:juniper-nsp- > [email protected]] On Behalf Of Filippo Cugini > Sent: Wednesday, March 06, 2013 8:16 AM > To: [email protected] > Cc: [email protected] > Subject: [j-nsp] Problems with Link Aggregation > > Hi, > > we configured the link-aggregation on two switches EX3200 with JUNOS > software 10.0R4.7. > We configured the aggregated interface (ae0), containing three ge > interfaces (ge-0/0/12, ge-0/0/14, ge-0/0/16). > At the operational level, the state of the aggregated interface (show > interfaces ae0 extensive) shows that the link is up at 3000mbps. > > However, when we send traffic on the aggregated link, just one ge works, > and we experience packet loss when we exceed the throughput of > 1000mbps. > Indeed, the statistics of all interfaces show that only the ge-0/0/12 is > utilized to forward the data traffic, while the other two interfaces > send and receive only signaling packets. > > Any suggestions? > > This is our one-side configuration: > > > chassis { > aggregated-devices { > ethernet { > device-count 1; > } > } > } > > interfaces { > ge-0/0/12 { > ether-options { > 802.3ad ae0; > } > } > ge-0/0/14 { > ether-options { > 802.3ad ae0; > } > } > ge-0/0/16 { > ether-options { > 802.3ad ae0; > } > } > > ... > > ae0 { > aggregated-ether-options { > minimum-links 2; > lacp { > active; > } > } > unit 0 { > family inet { > address 10.255.255.2/30; > } > } > } > > } > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
