Hi, btw, i already tried restart mib-proess and restart snmp, none of both were of any help. Also i can actually see the ifIndex in /var/db/dcd.snmp_ix (which is 560 for this interface) but while trying to read via snmp it always returns 0 despite carrying traffic.
Am Freitag, den 08.03.2013, 17:42 +0100 schrieb Tobias Heister: > Hi, > > Am 08.03.2013 16:33, schrieb Jonas Frey (Probe Networks): > > did anyone ever notice problems with wrong/changed SNMP ifIndex settings > > after ISSU? > > We ISSU upgraded a MX from 10.4R9.2 to 11.4R7.5 and after this some of > > the ifIndex changed. > > We had that a couple of time with the MX series (with and without ISSU), the > last time it happened from 9.6RX to 10.4RX on a couple of systems. > We will soon go from 10.4RX to 11.4RX so i am expecting it to happen again. > > > How do i get the ifIndex right? The workaround for EX doesnt help as > > there is no such process to restart on MX series. > > I am not aware of a way to fix that. We usually have to fix it in our NMS, > which is really annoying every time it happens. > > regards > Tobias > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp
signature.asc
Description: This is a digitally signed message part
_______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
