On 3/15/13 2:41 AM, Sebastian Wiesinger wrote:
> Has anyone here an easily understandable graphic for port numbering on
> MX80 mic slot(s)? I can't get it right half of the time and support
> staff on-site never knows which port is which. Even the labels on the
> box are not really helpful.
>
> Regards
>
> Sebastian
Simple trick if you are used to MPC based 960s... Rotate the chassis 90
degrees clockwise.
In normal orientation
Built in 10G are slot 0, left to right xe-0/0/0-3
Left MIC if loaded with 20x1G
BOTTOM row is left to right ge-1/0/0-9
TOP row is left to right ge-1/1/0-9
Left MIC if loaded with 2x10G
left, xe-1/0/0
right, xe-1/1/0
Right MIC if loaded with 20x1G
BOTTOM row is left to right ge-1/2/0-9
TOP row is left to right ge-1/3/0-9
Right MIC if loaded with 2x10G
left, xe-1/2/0
right, xe-1/3/0
Like I said, just like a MPC2 loaded in slot 1 of a 960, just tipped on
its side.
--
------------------------------------------------------------------------
Christopher E. Brown <[email protected]> desk (907) 550-8393
cell (907) 632-8492
IP Engineer - ACS
------------------------------------------------------------------------
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
