We had case with vc on 12.2R3 The vc cable didnt forwared traffic in one of the directions I think it is PSN 2013-03-868
Nitzan On Sun, Mar 24, 2013 at 12:32 PM, Tore Anderson <[email protected]> wrote: > * Timh Bergström > > > That's interesting, have you seen any other 'gotchas' with 12.2R3? I'm > > running a 11.3 version and desperately want NSSU (among other things) > > and have a similar setup, lag/lacp/vlan termination/routing/ospf(v3). > > Does 3rd party transceivers work? How is missing licenses handled > > (enforced/warnings)? > > I've seen one gotcha - uplinks to a couple of Cisco 6120s went down > after a short period of uptime. Error seen on the Cisco side was "DCX-No > ACK in 100 PDUs". No idea if the Cisco or the Juniper was to blame - I > never investigated the issue, as deleting the "protocols dcbx" > configuration hierarchy on the EX made the links stay up. I'm not using > DCBX for anything anyway, so I'm fine with that. > > Other than that: So far, so good. YMMV, of course. > > I'm using 3rd party optics with no issues, although most of them are > coded specifically for Juniper. We also use some Cisco-coded DAC cables > without any problems. > > I have no idea on how missing licences are handled, as I have all the > licences I need. > > -- > Tore Anderson > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
