Klaus, No, I don't want to form VC between 3300 and 4500.
nick On Mon, Apr 15, 2013 at 2:16 PM, Klaus Groeger <[email protected]> wrote: > Just one word, to double check if i understand you. You would like to form > a VC between 3300 and 4500? > > That won't work. You can only form VC between 3300 or between 45xxx and > 4200. > Klaus > — > Sent from Mailbox <https://bit.ly/SZvoJe> for iPhone > > > On Mon, Apr 15, 2013 at 9:41 AM, Nick Kritsky <[email protected]>wrote: > >> Thanks. Just to clarify - I am actually trying to prevent this from >> happening. >> EX-3300 have ports xe-0/1/2 and xe-0/1/3 put in VC-port mode by default. >> So I wonder if two fresh, brand new EX-3300 can form VC when they are >> plugged into upstream 4550 using vc-ports. >> This can explain some strange behavior i was observing recently, but I >> was too busy fixing it, so I didn't run much tests. >> I plan to setup small lab for that. I will let you know of the outcome. >> >> nick >> >> >> On Sun, Apr 14, 2013 at 4:33 PM, Klaus Groeger <[email protected]> wrote: >> >>> Hi >>> >>> I would recommend Q-in-Q on the intermediate switch. I have seen 4550 VC >>> spanning over metro erhernet, so this should work for 3300 also. >>> >>> Regards >>> >>> Klauzi >>> — >>> Sent from Mailbox <https://bit.ly/SZvoJe> for iPhone >>> >>> >>> On Sat, Apr 13, 2013 at 9:21 PM, Nick Kritsky <[email protected]>wrote: >>> >>>> Dear J-NSP, >>>> >>>> Can anyone confirm/deny if two EX3300 can form virtual-chassis when >>>> their >>>> vc-ports are connected via third switch? >>>> >>>> thanks >>>> nick >>>> _______________________________________________ >>>> juniper-nsp mailing list [email protected] >>>> https://puck.nether.net/mailman/listinfo/juniper-nsp >>>> >>>> >>> >> > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
