Hi all,
I'm looking at enabling targeted broadcasts on specific edge VLANs to
support Wake-on-LAN.
It looks like there aren't any knobs to control the behaviour:
admin@switch# set interfaces vlan unit 100 family inet targeted-broadcast ?
Possible completions:
<[Enter]> Execute this command
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don't inherit configuration data from these groups
| Pipe through a command
{master:0}[edit]
Is there any way to control which source IPs can send targeted
broadcasts, or is it as it seems -- i.e. that it's all or nothing?
The "forward-and-send-to-re" and "forward-only" knobs to control
forwarding aren't there on my JUNOS EX boxes. Does anyone know what
the behaviour is on EX-series?
Cheers,
Dale
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
