My apologies, I didn't pay attention to the blade you referenced. That blade is only good for switching unless you have the appropriate license to enable layer 3 protocols. Here's the document the clarifies what you can do with that card.
http://www.juniper.net/techpubs/en_US/junos10.3/topics/task/configuration/chassis-mx-series-ip-ethernet-mode-configuring.html On Apr 25, 2013, at 5:39 PM, "OBrien, Will" <[email protected]> wrote: > No license needed. Just configure under protocols. > > Will O'Brien > > On Apr 25, 2013, at 5:17 PM, "John pp" <[email protected]> wrote: > >> hi all >> >> i have a new MX480 with MPC-3D-16XGE-SFPP and I am trying to enable BGP but >> am not sure how? >> someone said I need a license is this true? >> you can email me: luklaupdates(AT, AT, FOR >> SPAM)gmail.com<[email protected]> >> >> thanks >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
