You will also need to follow this if adding a New/RMA SRX into a cluster which is 10.4 or older, should save you a few days of troubleshooting :)
http://kb.juniper.net/InfoCenter/index?page=content&id=KB23929 On Mon, Apr 29, 2013 at 3:33 PM, Craig Askings <[email protected]>wrote: > Hi Jim, > > On 29 April 2013 05:49, James Howlett <[email protected]> wrote: > > > Hi Paul, > > > > Thank You very much for the clarification. I will have only one ASBR. As > > for redundancy I'll go with a single 1400 unit and add a second in the > > future. Still, a single SRX1400 will be probably more stable then a > single > > J6350. > > > > I recently had a client that had a simliar plan to you of a single SRX1400 > now to a HA pair later. No BGP though, when we setup the first SRX we > configured it as if it was part of a HA pair and left it running in a > Active/Lost state. > > Once we got the second SRX we followed the SRX HA Hardware replacement > procedure in the Juniper KB and it all went smoothly with no hiccups or > outages. > > http://kb.juniper.net/InfoCenter/index?page=content&id=KB21134 > > > -- > > Regards, > > Craig Askings > > io Networks Pty Ltd. > > > > mobile: 0404 019365 > > phone: 1300 1 2 4 8 16 > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
