Does anyone know what the performance hit would be on an ex4200 POE switch if you enable the following on all interfaces? Would there be problems?
sflow {
polling-interval 20;
sample-rate 500;
collector 10.169.68.15;
interfaces ge-0/0/0.0;
interfaces ge-0/0/1.0;
}
AJ Pappas | Network Administrator
Ottawa Regional Hospital & Healthcare Center
www.ottawaregional.org <http://www.ottawaregional.org/> |
[email protected] <mailto:[email protected]>
phone: 815.431.5180 | mobile line: 815.993.8522
1100 East Norris Drive, Ottawa, IL 61350 USA
P Please consider the environment before printing this e-mail.
Confidentiality Notice: This e-mail may contain confidential
information. The information is intended only for the use of the
recipient named above. If you are not the intended recipient, you are
hereby notified that any disclosure, copying, distribution, or the
taking of any action in reliance on the contents of this information,
except its direct delivery to the intended recipient named above, is
strictly prohibited. If you have received this e-mail in error, please
notify the sender of this and also delete the e-mail from all systems
this message is stored on.
<<image001.jpg>>
_______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
