Morning, Cisco have a DMVPN solution for this, I believe the equivalent juniper solution can be seen at the following link....
http://kb.juniper.net/kb/documents/public/junos_es/JUNOS_ES_Multipoint_VPN_with_NHTB.pdf It's worth noting that this is a few years old now so it's likely to have been superseded by something else. Regards Paul -----Original Message----- From: juniper-nsp [mailto:[email protected]] On Behalf Of Nc Aji Sent: 07 May 2013 05:14 To: [email protected] Subject: [j-nsp] Srx 240 ipsec site to site Dear Group, I have a small customer requiring a VPN between two of the sites, One site is so remote where in we have only 3g internet connection available. other site which is considered to be the main site is having internet over an ADSL link . In essence both sides are getting dynamic IP address , can i have a site to site vpn in this situation ? Does SRX support dyndns feature ? can I use it for establishing site to site vpn ? if not what is the other option to suggest to customer ? _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
