Does RE based sampling have an adverse effect on the CPU/Memory. Plus the sample config in the link provided, the destination server details are configured under forwarding-options > sampling > output. But in version 11.1 the command options are not the same.The only option I see is as follows
set forwarding-options sampling family inet output flow-server 1.1.1.1 port x set forwarding-options sampling family inet output flow-server 1.1.1.1 version 5 set forwarding-options sampling family inet output flow-server 1.1.1.1 autonomous-system-type orgin set forwarding-options sampling family inet output flow-server 1.1.1.1 source-address x.x.x.x set forwarding-options sampling input max-packets-per-second set forwarding-options sampling input run-length 10 set forwarding-options sampling input rate 10 Will this work as well? On Thu, Jun 6, 2013 at 3:42 AM, Chris Kawchuk <[email protected]> wrote: > RE based Sampling: > > http://juniper.cluepon.net/index.php/Cflowd_configuration > > - CK. > > On 06/06/2013, at 9:01 AM, Jake Jake <[email protected]> wrote: > > > Hi All, > > > > Is it possible to export netflow/jflow from a M120 router(Junos 11.1) to > an > > external netflow analyser on the network without a Multiservice PIC > > installed? It would be great with a sample configuration that need to be > > applied on the router. > > > > Thanks. > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
