With MPC cards (which MX5 is) you need "enhanced-hash-key". http://www.juniper.net/techpubs/en_US/junos/topics/reference/configuration-statement/enhanced-hash-key-edit-forwarding-options.html
http://kb.juniper.net/InfoCenter/index?page=content&id=KB24339 -----Original Message----- From: juniper-nsp [mailto:[email protected]] On Behalf Of Huan Pham Sent: Wednesday, June 12, 2013 9:35 AM To: [email protected] Subject: [j-nsp] Unable to load-balance VPLS traffic Hi team, I am testing load-balancing VPLS traffic over multiple RSVP LSPs on 2 x MX5, but can not get it to work. The key piece of configuration to enable load-balance VPLS traffic is documented at the link below: http://www.juniper.net/techpubs/en_US/junos11.4/topics/task/configuration/load-balancing-vpls-mx-series-configuring.html forwarding-options { hash-key { family multiservice { payload { ip { layer-3; layer-4; } } } } } _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
