On 7/8/2013 10:26 AM, Keith wrote:
Have this setup in the lab on some srx's but want to get some info
on this.
We have an upstream provider that we use a config:
set interfaces ge-0/1/0 vlan-tagging
set interfaces ge-0/1/0 encapsulation flexible-ethernet-services
set interfaces ge-0/1/0 unit 1500 vlan-id 1500
set interfaces ge-0/1/0 unit 1500 family inet address x.x.x.x/30
We are turning up a second connection to them that will be terminated on a 10G
link and want us to use the same thing, vlan 1500, just a different IP address.
Will this cause a problem by having the same vlan id on both links to the
same provider? (I am guessing we are being terminated on different routers
on their side).
Thanks for replies. I knew it was ok, but just wanted to be that extra bit sure.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
