Thanks - another helpful person from the list sent me some config snippets offline that should set me in the right direction (using LT interfaces)
Much appreciated, Paul On 2013-07-25 12:08 PM, "Mark Tinka" <[email protected]> wrote: >On Thursday, July 25, 2013 06:54:57 PM Paul Stewart wrote: > >> Is there a way using an L2VPN to terminate the path on a >> loopback or other virtual interface? At the customer >> premise, there is a physical port which could be one end >> of the L2VPN but at a nearby core router I would like to >> "virtually" terminate the other end therefore creating a >> point to point /30 for BGP to speak over and provide a >> full table? > >Cisco call this a Routed Pseudowire: > >http://www.cisco.com/en/US/docs/ios- >xml/ios/mp_l2_vpns/configuration/xe-3s/mp-rt-pw-rt-vpls.html > >My memory fails me, but I recall someone mentioning >something like this on this list in past, using lt- >interfaces. Can't recall; any time I've wanted to do it, >it's been on a Cisco. > >Maybe someone else can chime in. > >Mark. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
