* [email protected] <[email protected]> [2013-07-25 01:21]:
> > "When using inline IPFIX the only valid rate is 1. The option
> > run-length isn't configurable, because there's no need to sample data
> > from the perspective of the microcode in the Trio Lookup Block. Every
> > packet will be inspected and is subject to flow export."
>
> We're doing inline IPFIX with 1:100 sampling rate, and getting sensible
> data. This is on an MPC-3D-16XGE-SFPP line card. Config snippet:
I can confirm this, we use a higher sampling rate on MX80 and on the
MPC-3D-16XGE-SFPP and on both we get valid data.
Regards
Sebastian
--
GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A 9D82 58A2 D94A 93A0 B9CE)
'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE.
-- Terry Pratchett, The Fifth Elephant
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
