>From the JNCIA study guide When you examine the output closely, you might notice that some command options are pre- ceded with a character—either an angle bracket (>) or a plus sign (+). These characters, as well as their absence, carry a special meaning when you use the set command.
The angle bracket is used to designate lower-level directories. In our case, the name-server option is really a subdirectory of [edit system]. The plus sign shows command variables you can configure that may have multiple values assigned. For example, the authentication-order option tells the router how to authenticate users who log in. You can assign a single authenti- cation method or multiple methods. Finally, some options do not have any characters preced- ing them. These are configurable variables, such as host-name, that may contain only a single possible value. On Jul 27, 2013, at 8:24 PM, Giuliano Medalha <[email protected]> wrote: People, When you start using configuration mode on JUNOS it shows the following output: user@ROUTER# set ? Possible completions: > access Network access configuration > access-profile Access profile for this instance > accounting-options Accounting data configuration > applications Define applications by protocol characteristics + apply-groups Groups from which to inherit configuration data > bridge-domains Bridge domain configuration > chassis Chassis configuration > class-of-service Class-of-service configuration > ethernet-switching-options Ethernet-switching configuration options Why apply-groups appears with a + instead of > signal ? Do you have the explanation for that ? Thanks a lot, Giuliano _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
