We had this happen several times over the past 3 years or so. In all cases there's no console output, all LEDs on solid, and fans spin up and remain spun up until power is removed from the device. We tried some Redneck Engineering on one failed box that wasn't under maintenance and replaced RAM and CF cards with no luck. We've moved to SRX gear for nearly all locations; however, I believe the J's had some internal diag lights that failed to indicate any problems (at least in our cases).
On Aug 1, 2013, at 12:19 PM, David Gee <[email protected]> wrote: > Hi all, > > > > Second post from me in the same month! Scary. > > > > So, long story short. Router went offline after a power outage. Didn't come > back. Remote hands consoled in and reported back: > > > > "All four LED's are on permanently. We've unplugged, plugged it back in, > rebooted and rebooted some more. No console output". > > > > I've had a quick look around but can't find anything specific. I'm thinking > at this point it's either, RAM, CPU or possibly compact flash? The DC is a > few miles away, so contemplating jumping on Ebay and buying some spares to > cover as many realistic outcomes as possible. Any thoughts or experience > with this? > > > > Thanks > > David > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
