Hi Rodrigo, some suggestions can be found here:
http://www.juniper.net/us/en/community/junos/training-certification/day-one/networking-technologies-series/a-packet-walkthrough/ HTH ./diogo -montagner JNCIE-SP 0x41A On Mon, Aug 19, 2013 at 6:31 AM, Rodrigo Augusto <[email protected]>wrote: > Hi folks! > Does anyone knows if can i generate traffic from mx to mx?! Like iperf or > ostinato... > > > Enviado via iPhone > Grupo Connectoway > > Em 18/08/2013, às 16:56, Giuliano Medalha <[email protected]> > escreveu: > > > People, > > > > Someone on the list have implemented virtual chassis using EX8208 before > ? > > > > We are looking for some sample of configuration related to a firewall > > filter (Ex. PROTECT-RE) for EX8208 in a Virtual Chassis Environment ? > > > > Is it possible to use the same loopback address ? It will protect the > > external XRE200 at the same way ? Is it correct ? > > > > I am looking for some reference inside JUNIPER web site without sucess. > > > > The VCP ports must be configured with any kind of filter ? > > > > The input policer is not permited in loopback 0 ... how is possible to > > policer ICMP packets for example ? > > > > Does anyone on list has some experience with that ? > > > > Thanks a lot, > > > > Giuliano > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
