Yes. If there is a cli command that has a xml output, you can use the snmp utility mib to populate a private mib oid.
On Thursday, 22 August 2013, Morgan McLean wrote: > Could something like this also be used to populate an SNMP OID for SRX > chassis cluster monitoring? Currently juniper has no way of checking > chassis cluster details over SNMP. > > Morgan > > > On Sun, Aug 18, 2013 at 6:36 PM, Diogo Montagner < > [email protected] <javascript:_e({}, 'cvml', > '[email protected]');>> wrote: > >> Correct. I confused with MX-VC that supports it. >> >> By the way, the way you get that info on CLI is using "show >> virtual-chassis >> vc-port statistics vcp-x/y/z extensive" which is translated into the RPC >> call used in the script of the KB article you posted. >> >> On Monday, 19 August 2013, Giuliano Medalha wrote: >> >> > There is no option for: >> > >> > >> > show interface queue vcp-x/y/z >> > >> > >> > It does not support it. >> > >> > >> > I think that the following KB solved the problem for EX8208 and >> > EX4200/4500/4550: >> > >> > >> > http://kb.juniper.net/InfoCenter/index?page=content&id=KB27711&actp=RSS >> > >> > >> > Thanks a lot, >> > >> > Giuliano >> > >> > >> > >> > >> > WZTECH is registered trademark of WZTECH NETWORKS. >> > Copyright © 2013 WZTECH NETWORKS. All Rights Reserved. >> > >> > The information transmitted in this email message and any attachments >> are >> > solely for the intended recipient and may contain confidential or >> > privileged information. If you are not the intended recipient, any >> review, >> > transmission, dissemination or other use of this information is >> > prohibited. If you have received this communication in error, please >> notify >> > the sender immediately and delete the material from any computer, >> including >> > any copies. >> > >> > >> > On Fri, Aug 16, 2013 at 8:32 PM, Diogo Montagner < >> > [email protected] <javascript:_e({}, 'cvml', >> '[email protected]');> <javascript:_e({}, 'cvml', >> > '[email protected] <javascript:_e({}, 'cvml', >> '[email protected]');>');>> wrote: >> > >> >> The problem of this approach is that you are assuming all packets will >> >> have the same size. >> >> >> >> You could use the timestamp of each collection to calculate how many >> >> packets traversed the interface in that period. It doesn't have a good >> >> accuracy but will give something very close. >> >> >> >> What about getting the pps and bps from the show interface queue >> >> vcp-x/y/z ? >> >> >> >> Thanks >> >> >> >> On Saturday, 17 August 2013, Giuliano Medalha wrote: >> >> >> >>> People, >> >>> >> >>> We are doing a custom management system for VCP interfaces monitoring >> >>> using >> >>> NETCONF in JUNOS. >> >>> >> >>> The following stats are the only one reported to us: >> >>> >> >>> T2 >> >>> <input-packets>3966099</input-packets> >> >>> <output-packets>3985901</output-packets> >> >>> >> >>> T1 >> >>> <input-packets>3966000</input-packets> >> >>> <output-packets>3985850</output-packets> >> >>> >> >>> >> >>> How is possible to calculate the input rate and the ouput rate ? >> >>> >> >>> The MTU for the interface is 1514. >> >>> >> >>> Can we consider something like: >> >>> >> >>> 1514 x 8 x (3966099-3966000) / (T2 - T1) >> >>> >> >>> It can be considering a goog mean value ? Or we will have so much >> >>> variations for packet size ? >> >>> >> >>> packet size for JUNOS (VCP interface) is the same as ethernet >> frame-size >> >>> ? >> >>> >> >>> Thanks a lot, >> >>> >> >>> Giuliano >> >>> _______________________________________________ >> >>> juniper-nsp mailing list [email protected]<javascript:_e({}, >> >>> 'cvml', '[email protected]');> >> >>> https://puck.nether.net/mailman/listinfo/juniper-nsp >> >>> >> >> >> >> >> >> -- >> >> ./diogo -montagner >> >> JNCIE-SP 0x41A >> >> >> > >> > >> >> -- >> ./diogo -montagner >> JNCIE-SP 0x41A >> _______________________________________________ >> juniper-nsp mailing list [email protected] <javascript:_e({}, >> 'cvml', '[email protected]');> >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > > > > -- > Thanks, > Morgan > -- ./diogo -montagner JNCIE-SP 0x41A _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
