path-selection? http://www.juniper.net/techpubs/en_US/junos11.4/topics/reference/general/routing-ptotocols-address-representation.html
On Wed, Sep 4, 2013 at 2:10 PM, Johan Borch <[email protected]> wrote: > Hi list! > > Lets say that I have three routers. > > Router1: receives a full table from ISP X > Router2: No eBGP > Router3: receives a full table from ISP Y > > R1 and R2 is connected via MPLS/L3VPN > R1 and R3 is connected via fiber > R2 and R3 is connected via fiber > > iBGP i used between R1-R3 and R2-R3. > > R1 divides the prefixes fine between it's own transit and the transit from > R3 > > My problem is with R2 that received tables both from R1 and R2 but it > prefer to make altmost everything active from R3 due to "Inactive reason: > IGP metric". the L3VPN adds 1 to the metric2 value due to the L3VPN. Is > there some way around this IGP-metric? > > Regards > Johan > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Phil Fagan Denver, CO 970-480-7618 _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
