I have the 768M flavor and have already upgraded the CF to 2GB. I'm currently on 8.5 and wanted to get to the latest version for these 2 lab boxes.
I'll give 10.4 a shot for now. Thanks for all of the responses! On Tue, Sep 10, 2013 at 4:10 PM, Jerry Jones <[email protected]> wrote: > Depends a lot of which flavor you have with what memory > > This RE came with either 246M or 768M of memory and an 80MB flash > > *Note: *For M-series, MX-series, and T-series routing platforms, the > CompactFlash card memory requirement for JUNOS software Release 9.0 is 1 > GB. For M7i and M10i routing platforms with only 256 MB of memory, see the > Customer Support Center JTAC Technical Bulletin PSN-2007-10-001: > https://www.juniper.net/alerts/viewalert.jsp?txtAlertNumber=PSN-2007-10-001&actionBtn=Search > . > > Hope this helps > > > On Sep 10, 2013, at 2:49 PM, N. Max Pierson <[email protected]> wrote: > > Hi list, > > I have a couple of old m10s with re-333s in them and I would like to > upgrade them to whatever the last version of Junos code they can run. These > are lab routers and not production. Can someone point me in the right > direction? I've seen a few folks say 10.4 will work, but I only see the > m120, m160, m320 etc on the downloads page. I assume the m120 image would > work in this case? > > Thanks All! > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
