Hi,
while troubleshooting high CPU on our EX mixed-mode VC (4200 and 4550) our JTAC
engineer noticed that one pair of ports is making changes to the MAC learning
table at an alarming rate. My SRX3400 fab links are connected to the ports in
question (I'm waiting on parts to correct this and directly connect the fab
ports). If you watch the mac-learning-log it looks like the SRX is sending
packets over the fab link that use a private/fake Ethernet address and are
quickly enumerating through a list of Ethernet addresses.
Has anyone else ever seen this? is there a way to stop it or minimize its
potential effect on the switch cpu? Note that it's not yet proven this is the
source of the high cpu.
> show ethernet-switching mac-learning-log
<snip>
Fri Oct 4 12:45:21 2013 vlan_name srx_fab_temp mac 00:00:dd:32:00:00 was
deleted on xe-0/0/28.0
Fri Oct 4 12:45:21 2013 vlan_name srx_fab_temp mac 00:00:e1:a0:00:00 was
learned on xe-2/0/28.0
Fri Oct 4 12:45:21 2013 vlan_name srx_fab_temp mac 00:00:dd:50:00:00 was
deleted on xe-0/0/28.0
Fri Oct 4 12:45:21 2013 vlan_name srx_fab_temp mac 00:00:dd:61:00:00 was
deleted on xe-0/0/28.0
Fri Oct 4 12:45:21 2013 vlan_name srx_fab_temp mac 00:00:dd:26:00:00 was
deleted on xe-0/0/28.0
Fri Oct 4 12:45:21 2013 vlan_name srx_fab_temp mac 00:00:dd:17:00:00 was
deleted on xe-0/0/28.0
Fri Oct 4 12:45:21 2013 vlan_name srx_fab_temp mac 00:00:e1:a1:00:00 was
learned on xe-2/0/28.0
Fri Oct 4 12:45:21 2013 vlan_name srx_fab_temp mac 00:00:dd:44:00:00 was
deleted on xe-0/0/28.0
Fri Oct 4 12:45:22 2013 vlan_name srx_fab_temp mac 00:00:e1:a2:00:00 was
learned on xe-2/0/28.0
Fri Oct 4 12:45:22 2013 vlan_name srx_fab_temp mac 00:00:e1:a3:00:00 was
learned on xe-2/0/28.0
Fri Oct 4 12:45:22 2013 vlan_name srx_fab_temp mac 00:00:dd:48:00:00 was
deleted on xe-0/0/28.0
Fri Oct 4 12:45:22 2013 vlan_name srx_fab_temp mac 00:00:dd:1b:00:00 was
deleted on xe-0/0/28.0
Fri Oct 4 12:45:22 2013 vlan_name srx_fab_temp mac 00:00:dd:2a:00:00 was
deleted on xe-0/0/28.0
Fri Oct 4 12:45:22 2013 vlan_name srx_fab_temp mac 00:00:e1:a4:00:00 was
learned on xe-2/0/28.0
Fri Oct 4 12:45:22 2013 vlan_name srx_fab_temp mac 00:00:e1:a5:00:00 was
learned on xe-2/0/28.0
Fri Oct 4 12:45:22 2013 vlan_name srx_fab_temp mac 00:00:dd:51:00:00 was
deleted on xe-0/0/28.0
Fri Oct 4 12:45:23 2013 vlan_name srx_fab_temp mac 00:00:e1:a6:00:00 was
learned on xe-2/0/28.0
Fri Oct 4 12:45:23 2013 vlan_name srx_fab_temp mac 00:00:dd:60:00:00 was
deleted on xe-0/0/28.0
Fri Oct 4 12:45:23 2013 vlan_name srx_fab_temp mac 00:00:dd:33:00:00 was
deleted on xe-0/0/28.0
Fri Oct 4 12:45:23 2013 vlan_name srx_fab_temp mac 00:00:e1:a7:00:00 was
learned on xe-2/0/28.0
the EX port config:
> show configuration interfaces xe-0/0/28
Oct 04 13:00:13
description srx01-xe-1/0/1;
mtu 9216;
unit 0 {
family ethernet-switching {
vlan {
members 500;
}
}
}
> show configuration interfaces xe-2/0/28
Oct 04 13:32:52
description srx02-xe-1/0/1;
mtu 9216;
unit 0 {
family ethernet-switching {
vlan {
members 500;
}
}
}
SRX:
srx01> show configuration interfaces fab0
fabric-options {
member-interfaces {
xe-1/0/1;
}
}
srx01> show configuration interfaces fab1
fabric-options {
member-interfaces {
xe-9/0/1;
}
}
srx01> show configuration interfaces xe-1/0/1
srx01> show configuration interfaces xe-9/0/1
srx01>
thanks!
-andy
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
