Hi All,
I'm trying to configure AppTrack on SRX210H and 210HE. I've done the
license thing and also downloaded and installed Application Identification.
the last step is to configure that AppTrack as below:
admin@RFW1# show security log
format syslog;
source-address 10.0.250.33;
stream AppTrack {
host {
10.1.113.2;
port 9995;
}
}
[edit]
[edit]
admin@RFW1# show security application-tracking
first-update;
session-update-interval 4;
[edit]
admin@RFW1# show security zones security-zone trust application-tracking
application-tracking;
I can see the result on firewall itself is counting of AppTrack with number
sessions and bytes for each applications.
Problem is that it doesn't export this data collection to the server, in my
case is 10.1.113.2. This server is not STRM, but it's NFSEN instead.
1. Anyone used to setup NFSEN for this ?
2. Anyway to see that FW is sending the collected data to server ?
Thanks,
Samol
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
