Le 24/10/2013 00:55, Ben Dale a écrit :
Can you confirm that you have two "active" port-channels configured on
the Cisco side, one into each SRX?
From the docs I found I was assuming a single port-channel could handle
all interfaces attached to the same reth on srx.
For example, if ge-0/0/2, ge-0/0/3, ge-5/0/2, ge-5/0/3 are attached to
reth0, can I connect all the ports to the same etherchannel on the stack ?
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
