show chassis fpc is a start. you can run various diags on the fpc pics themselves as well.
On Oct 25, 2013, at 2:25 PM, Keith wrote: > Is there a command on JunOS similar to the cisco command: > > show controller utilization > > Thanks, > Keith > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
