Ok I have changed the static IP address to 164 and the static NAT worked , I will try the destination port again
On Thu, Nov 28, 2013 at 2:04 PM, Mohammad Khalil <[email protected]> wrote: > Ok i will give it a shot , but before that I have tried something > different , I just want to configure static NAT (one to one) > set security nat static rule-set static-nat from zone untrust > set security nat static rule-set static-nat rule ALTOS_STATIC match > destination-address 24.173.164.162/32 > set security nat static rule-set static-nat rule ALTOS_STATIC then > static-nat prefix 132.147.160.3/32 > > > set security zones security-zone trust address-book address ALTOS_SERVER > 132.147.160.3/32 > > set security nat proxy-arp interface ge-0/0/0.0 address 24.173.164.162/32 > > set security policies from-zone untrust to-zone trust policy > DNAT_ALTOS_POLICY match source-address any > set security policies from-zone untrust to-zone trust policy > DNAT_ALTOS_POLICY match destination-address ALTOS_SERVER > set security policies from-zone untrust to-zone trust policy > DNAT_ALTOS_POLICY match application Tany > set security policies from-zone untrust to-zone trust policy > DNAT_ALTOS_POLICY then permit > > and ping is not working !! > > > On Thu, Nov 28, 2013 at 1:58 PM, Per Westerlund <[email protected]> wrote: > >> No. >> >> /Per >> >> 28 nov 2013 kl. 11:53 skrev Mohammad Khalil <[email protected]>: >> >> Should I add static NAT statement ? >> >> >> > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
