On (2013-11-29 10:15 -0800), Bill Blackford wrote: > I hope this is not too off topic, but it may be worth mentioning here that > the EX series (2200-4500) will only receive (routes received) a random > subset of a full BGP table. If it's your plan to receive a full table then > filter upon that, you won't be filtering against full routes. I learned > that one the hard way.
My initial reaction is, this was pilot error. JunOS works by default like IOS with 'soft-reconfiguration inbound'. I.e. all routes you've received are stored, filtered or not. And I would imaxine the EX not having memory to receive all routes, so you likely simply exhausted your control-plane DRAM and left the system in rather unpredictable state. You could configure 'keep none' in JunOS to stop storing filtered routes and you likely should be able to receive full table just well and cherry-pick what routes you're interested in. -- ++ytti _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
