If you're capturing your outbound ping packet, why does the capture show "echo reply"? Shouldn't you be capturing the echo request?
Serge ________________________________ From: Arash Alizadeh <[email protected]> To: "[email protected]" <[email protected]> Sent: Wednesday, January 22, 2014 10:21:44 AM Subject: [j-nsp] MX ping - ToS overrided Hi, I'm experiencing issues when initating ToS ping from MX devices. The specified ToS argument just seems to be overrided to dec 192 when leaving the interface. I verified this with the traffic monitor on the egress interface: user@node> ping 8.8.8.8 tos 96 64 bytes from 8.8.8.8: icmp_seq=0 ttl=246 time=15.675 ms 64 bytes from 8.8.8.8: icmp_seq=1 ttl=246 time=15.385 ms user@node> monitor traffic interface xe-0/0/0.0 extensive matching icmp PFE proto 2 (ipv4): (tos 0xc0, ttl 255, id 16332, offset 0, flags [none], proto: ICMP (1), length: 84) x.x.x.x > 8.8.8.8: ICMP echo reply, id 47826, seq 0, length 64 14:06:58.721197 Out I've tried this on 11.4R6.6 and 12.3R4-S2 (ppc and 64-bit) boxes with the same result. Did anyone else ran into this issue? Any input is appriciated. Regards, Arash _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
