The CLI changes right now only apply to new hardware — EX9200, EX4300, QFX5100. The other EX products still use the “normal” way, even on the latest code.
I’m not sure if they are planning on running the ELS syntax on other EX platforms or not. will On Feb 19, 2014, at 12:00 PM, [email protected] wrote: > Message: 3 > Date: Wed, 19 Feb 2014 18:12:37 +0200 > From: Mark Tinka <[email protected]> > To: [email protected] > Subject: Re: [j-nsp] VLAN's on EX4300 with 13.2X50-D15.3 > Message-ID: <[email protected]> > Content-Type: text/plain; charset="us-ascii" > > On Wednesday, February 19, 2014 12:25:55 PM Giuliano Cardozo > Medalha wrote: > >> ex4300 uses next generation cli for L2 > > Does all this roll over cleanly into an upgrade if you were > running previous generation CLI with earlier code? > > Mark. > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: signature.asc > Type: application/pgp-signature > Size: 836 bytes > Desc: This is a digitally signed message part. > URL: > <https://puck.nether.net/pipermail/juniper-nsp/attachments/20140219/3ff446e6/attachment-0001.sig> > > ------------------------------ > > Subject: Digest Footer _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
