Yes if traffic goes in/out of the same PIC. We have some IQ2Es on some M10is. The numbers were 4:1 when testing with a Spirent, but smaller MTU size packets @ 64 and 128 the transfer rate is less.
Can't recall any commands for the PIC, just recall seeing no drops on the interface queues and knowing the loss was due to the traffic flow oversubscribing the PIC. Thanks, Eduardo Eduardo Barrios, EIT, JNCIP-SP Telecommunications Specialist Lower Colorado River Authority | 3505 Montopolis Dr. | Austin, TX 78744 512.730.6332 ph -----Original Message----- From: juniper-nsp [mailto:[email protected]] On Behalf Of mdb1986 Sent: Wednesday, February 19, 2014 4:30 PM To: [email protected] Subject: [External] [j-nsp] PIC Oversubscription Show Commands My understanding is the 4x1GE IQ2 PIC is oversubscribed 4:1. Are there any commands to see if there is congestion on the PIC? Really, I'm wondering if there are any commands that show congestion within the switch itself (ie PIC to/from FPC, FPC to/from CFEB, etc.,) I can't seem to find any. Thanks, _______________________________________________ juniper-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
