I think Dave Bell is right as on switch it is as follows: "set vlans v305 dot1q-tunneling *customer-vlans 105"*
So the inner vlan must be 104 and outer vlan must be 305 but on MX it is as below. " set bridge-domains VLAN-305 vlan-tags outer 105 set bridge-domains VLAN-305 vlan-tags inner 305 " Instead it should be as below because on MX the inner-vlan is 305, not 105. " set bridge-domains VLAN-305 vlan-tags *outer 305* set bridge-domains VLAN-305 vlan-tags *inner 105* *"* Best, Atif On Thu, Mar 6, 2014 at 3:54 PM, Rodrigo Augusto <[email protected]>wrote: > You have to change mtu parameters to enable q-inq ? > > Rodrigo Augusto > Gestor de T.I. Grupo Connectoway > http://www.connectoway.com.br <http://www.connectoway.com.br/> > http://www.1telecom.com.br <http://www.1telecom.com.br/> > * [email protected] > ( (81) 3366-7376 > ( (81) 8184-3646 > ( INOC-DBA 52965*100 > > > > > On 06/03/14 06:23, "Mohammad Khalil" <[email protected]> wrote: > > >Hi guys , can anyone assist with the above configuration ? > >I have tried the same with EX4200 and MX480 and did not work as well > > > >BR, > >Mohammad > > > > > >On Wed, Jun 26, 2013 at 11:20 AM, Mohammad Khalil > ><[email protected]>wrote: > > > >> Hi and sorry for the late reply > >> Please find the configuration I did > >> > >> ex3200: > >> > >> ------ > >> > >> > >> > >> set interfaces ge-0/0/23.0 family ethernet-switching vlan members v305 > >> > >> set vlans v305 vlan-id 305 > >> > >> set vlans v305 interface ge-0/0/23.0 > >> > >> set vlans v305 dot1q-tunneling customer-vlans 105 > >> > >> > >> > >> MX480: > >> > >> ------- > >> > >> set interfaces ge-5/0/8 unit 0 family bridge vlan-id-list 305 > >> > >> set bridge-domains VLAN-305 domain-type bridge > >> > >> set bridge-domains VLAN-305 vlan-tags outer 105 > >> > >> set bridge-domains VLAN-305 vlan-tags inner 305 > >> > >> set bridge-domains VLAN-305 routing-interface irb.305 > >> BR, > >> Mohammad > >> > >> > >> On Tue, Jun 18, 2013 at 4:17 PM, Jared Gull <[email protected]> wrote: > >> > >>> Hi Mohammad, > >>> > >>> Can you share your current configurations and the topology details? > >>>Also, > >>> please explain how you're testing this and what you're seeing or not > >>>seeing. > >>> > >>> -Thanks, > >>> > >>> Jared > >>> > >>> ------------------------------ > >>> *From:* Mohammad Khalil <[email protected]> > >>> *To:* "[email protected]" <[email protected]> > >>> *Sent:* Tuesday, June 18, 2013 1:49 AM > >>> *Subject:* [j-nsp] QinQ > >>> > >>> Hi all , i am trying to implement QinQ between mx480 and ex4200 , does > >>> anyone have previous experience with that ? > >>> > >>> Thanks > >>> _______________________________________________ > >>> juniper-nsp mailing list [email protected] > >>> https://puck.nether.net/mailman/listinfo/juniper-nsp > >>> > >>> > >>> > >> > >_______________________________________________ > >juniper-nsp mailing list [email protected] > >https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Atif _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
