Ive just tried this on my J2300 running 9.3r4.4. The certificate now appears, unlike before when nothing appeared:
root> show system certificate Certificate identifier: FeatureLicense-v4 However my FPC is still seemingly refusing to come online: root> show chassis fpc detail Slot 0 information: State Offline Reason Chassis connection dropped root> request chassis fpc slot 0 online FPC 0 is in transition, try again The instructions dont seem to indicate whether anything further from adding the new certificate needs to be done. I tried a couple of reboots, and that didnt seem to help. Any clues? On 28 March 2014 20:15, Mircho Mirchev <[email protected]> wrote: > Tomorrow I test this with 9.3 and keep the list posted about the result. > In 9.3 there's no specific license to enable all the ports. Seems it's > embedded. > > Sent from my mobile. > On 28 Mar 2014 21:41, "Damon Vaughn" <[email protected]> wrote: > >> Please refer to Juniper technical service bulletin TSB16366 that documents >> the fix for the certificate issue. >> >> ----------------------------------------- >> Confidentiality Notice: >> This email and any of its attachments may be legally privileged >> and/or confidential. If you are not an intended recipient, you >> should not retain, disseminate, distribute, or copy this e-mail and >> may be violating law if you do so. If you have received this e-mail >> in error, please notify the sender and permanently delete this >> e-mail and any attachments immediately. >> >> >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
